NCT Technologies Group Inc

Thompson Auctioneers

Category: METALWORKING & FABRICATION EQUIPMENT

Total Lots: 92

Total Sales: 🔒 Subscribe

Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 51–92 of 92 lots

Year	Make	Model	Lot Description	Hammer Price
	GLOBAL INDUSTRIAL		(6) GLOBAL INDUSTRIAL FOLDING WIRE BASKETS, 40"L X 32"W X 34-1/2"H, 3000 LB. CAPACITY, GRAY GLOBAL INDUSTRIAL	🔒 Subscribe
	GLOBAL INDUSTRIAL		(6) GLOBAL INDUSTRIAL FOLDING WIRE BASKETS, 40"L X 32"W X 34-1/2"H, 3000 LB. CAPACITY, GRAY GLOBAL INDUSTRIAL	🔒 Subscribe
	GLOBAL INDUSTRIAL		(6) GLOBAL INDUSTRIAL FOLDING WIRE BASKETS, 40"L X 32"W X 34-1/2"H, 3000 LB. CAPACITY, GRAY GLOBAL INDUSTRIAL	🔒 Subscribe
	WELDOMATIC	AF-25	WELDOMATIC SPOT WELDER, MODEL AF-25, 75 KVA, 36 INCH THROAT, UNITROL SOLUTION CONTROLS, UPGRADED BY T.J. SNOW CO. S/N: 3298 WELDOMATIC · AF-25	🔒 Subscribe
	TENNSMITH		TENNSMITH 24 INCH MANUAL SLIP ROLL TENNSMITH	🔒 Subscribe
	LUBOW	NIPPER	LUBOW NIPPER LUBOW · NIPPER	🔒 Subscribe
	GLOBAL INDUSTRIAL		(6) GLOBAL INDUSTRIAL FOLDING WIRE BASKETS, 40"L X 32"W X 34-1/2"H, 3000 LB. CAPACITY, GRAY GLOBAL INDUSTRIAL	🔒 Subscribe
			STEEL TABLE, 48 INCH (L) _ 48 INCH (W) _ 35 INCH (H)	🔒 Subscribe
1972	PEXTO	PH52	1972 PEXTO PH52 HYDRAULIC SHEAR, 16 GAUGE X 52", FOOT PEDAL S/N: 12/72 1972 · PEXTO · PH52	🔒 Subscribe
	HYD-MECH	C350-2S	HYD-MECH MODEL C350-2S COLD SAW, SEMI-AUTOMATIC, 4 1/2 INCH CAPACITY, 3 HP, 14 INCH BLADE S/N: 5-03-15-148-SB HYD-MECH · C350-2S	🔒 Subscribe
			STEEL TABLE, 46 INCH (L) _ 96 INCH (W)	🔒 Subscribe
			OVEN - NEEDS ASSEMBLED	🔒 Subscribe
			STEEL TABLE, 61 INCH (L) 120 INCH (W) 37 INCH (H) WITH 5 INCH BENCH VISE	🔒 Subscribe
			STEEL TABLE, 49 INCH (L) _ 72 INCH (W) _ 32 INCH (H)	🔒 Subscribe
	LINCOLN	140C	LINCOLN 140C MIG WELDER, PORTABLE LINCOLN · 140C	🔒 Subscribe
			STEEL TABLE, 61 INCH (L) _ 120 INCH (W) _ 37 INCH (H)	🔒 Subscribe
			MODULAR STEEL STORAGE RACK, 42 INCH (L) _ 48 INCH (W) _ 73 INCH (H)	🔒 Subscribe
	AKRO MILLS		AKRO MILLS BIN RACK 2 SIDED, 36 INCH (W) 72 INCH (H) AKRO MILLS	🔒 Subscribe
			(4) STEEL MATERIAL TRANSPORT CARTS, 31 INCH (L) _ 42 INCH (W) _ 52 INCH (H)	🔒 Subscribe
			STEEL MATERIAL STORAGE RACK, 48 INCH (L) X 48 INCH (W) X 42 INCH (H)	🔒 Subscribe
	MORRISON INDUSTRIES	STACKABLE SHIPPING RACK (PROTOTYPE: 18344)	MORRISON INDUSTRIES STACKABLE SHIPPING RACK (PROTOTYPE: 18344), 52 INCH (L) _ 48 INCH (W) _ 52 INCH (H) MORRISON INDUSTRIES · STACKABLE SHIPPING RACK (PROTOTYPE: 18344)	🔒 Subscribe
	ALL STEEL	20-4	ALL STEEL HYDRAULIC PRESS BRAKE, MODEL 20-4, 20 TON X 48 INCH S/N: 175 ALL STEEL · 20-4	🔒 Subscribe
	BRIDGEPORT	SERIES I	2 HP BRIDGEPORT SERIES I VERTICAL MILL BRIDGEPORT · SERIES I	🔒 Subscribe
			STEEL RACK, 24 INCH (L) _ 48 INCH (W) _ 68 INCH (H)	🔒 Subscribe
			MATERIAL TRANSPORT CART, 28 INCH (L) _ 48 INCH (W) _ 76 INCH (H)	🔒 Subscribe
			MATERIAL TRANSPORT CART, 37 INCH (L) _ 48 INCH (W) _ 56 INCH (H)	🔒 Subscribe
			MATERIAL TRANSPORT CART, 32 INCH (L) _ 42 INCH (W) _ 72 INCH (H)	🔒 Subscribe
			CARTON GRAVITY FLOW ROLLER RACK, 33 INCH (L) _ 49 INCH (W) _ 59 INCH (H)	🔒 Subscribe
			(2) STEEL RACKS ON CASTERS, 30 INCH (L) _ 35 INCH (W) _ 67 INCH (H)	🔒 Subscribe
			CARTON GRAVITY FLOW ROLLER RACK, 33 INCH (L) _ 49 INCH (W) _ 59 INCH (H)	🔒 Subscribe
			CARTON GRAVITY FLOW ROLLER RACK ON CASTERS, 50 INCH (L) X 72 INCH (W) X 49 INCH (H)	🔒 Subscribe
			CARTON GRAVITY FLOW ROLLING RACK ON CASTERS, 32 INCH (L) X 72 INCH (W) X 49 INCH (H), 1,200 LB CAPACITY	🔒 Subscribe
			STEEL MATERIAL CART, 32 INCH (L) _ 42 INCH (W) _ 71 INCH (H)	🔒 Subscribe
			STEEL STACKABLE SHIPPING / STORAGE RACK, 48 INCH (L) _ 84 INCH (W) _ 56 INCH (H)	🔒 Subscribe
2013	MATTEI	M111C-ICBFN000A	2013 MATTEI M111C-ICBFN000A AIR COMPRESSOR, 25 HP, WITH MATTEI AIR DRYER, AND HOLDING TANK S/N: 093305-2013 2013 · MATTEI · M111C-ICBFN000A	🔒 Subscribe
	POWDER X	FD150-PB	POWDER X CURING OVEN 10' W X 8' T X 24', POWER FLAME BURNER, MODEL FD150-PB, S/N. 010806430, JOB ORDER NO. J042709, TYPE: NATURAL GAS, CAPACITY: 751500 MBH, CONTROL VOLTAGE: 115V/1PH/60HZ, CONTROL AMPS: 6.0, MOTOR VOLTAGE: 115V/1PH/60HZ, MOTOR AMPS: 5.6, MOTOR HORSEPOWER: 1/3 HP, GAS MANIFOLD PRESSURE: 1.7 IN. W.C. POWDER X · FD150-PB	🔒 Subscribe
	TOYOTA	5FBA15	TOYOTA 5FBA15 FORK LIFT, LP, HARD TIRE, CAGE, 2,900 LB. CAPACITY, 4' FORKS. S/N: 24177 TOYOTA · 5FBA15	🔒 Subscribe
	DAITO	GA320	DAITO GA320 SEMI AUTOMATIC HORIZONTAL BAND SAW, 1 1/4 INCH BLADE, 12.5 INCH X 12.5 INCH RECT. CAP., 13 INCH ROUND CAPACITY DAITO · GA320	🔒 Subscribe
	DO-ALL		DO-ALL VERTICAL BAND SAW, 36 INCH, BLADE WELDER, TABLE FEED DO-ALL	🔒 Subscribe
	TAYLOR WINFIELD	ERF-12-30	TAYLOR WINFIELD ERF-12-30 AIROPER SPOT WELDERM, TECHNITRON WELD CONTROLS, 30 KVA, 12 INCH THROAT, 230/460/3/60 S/N: 73460B TAYLOR WINFIELD · ERF-12-30	🔒 Subscribe
	G.E. SCHMIDT	APR1275-2050	G.E. SCHMIDT APR1275-2050 SPOT WELDER, 75 KVA, WITH WTC TECHNITRON CONTROLS S/N: 01511 G.E. SCHMIDT · APR1275-2050	🔒 Subscribe
	MILLER	DELTAWELD 650	MILLER DELTAWELD 650 MIG WELDER, MILLER WIRE FEEDS, 200/208/230/460/3/60 S/N: JC623372 MILLER · DELTAWELD 650	🔒 Subscribe

Year	Make	Model	Description	Price
	GLOBAL INDUSTRIAL		(6) GLOBAL INDUSTRIAL FOLDING WIRE BASKETS, 40"L X 32"W X 34-1/2"H, 3000 LB. CAPACITY, GRAY	🔒 Subscribe
	GLOBAL INDUSTRIAL		(6) GLOBAL INDUSTRIAL FOLDING WIRE BASKETS, 40"L X 32"W X 34-1/2"H, 3000 LB. CAPACITY, GRAY	🔒 Subscribe
	GLOBAL INDUSTRIAL		(6) GLOBAL INDUSTRIAL FOLDING WIRE BASKETS, 40"L X 32"W X 34-1/2"H, 3000 LB. CAPACITY, GRAY	🔒 Subscribe
	WELDOMATIC	AF-25	WELDOMATIC SPOT WELDER, MODEL AF-25, 75 KVA, 36 INCH THROAT, UNITROL SOLUTION CONTROLS, UPGRADED BY T.J. SNOW CO. S/N: 3298	🔒 Subscribe
	TENNSMITH		TENNSMITH 24 INCH MANUAL SLIP ROLL	🔒 Subscribe
	LUBOW	NIPPER	LUBOW NIPPER	🔒 Subscribe
	GLOBAL INDUSTRIAL		(6) GLOBAL INDUSTRIAL FOLDING WIRE BASKETS, 40"L X 32"W X 34-1/2"H, 3000 LB. CAPACITY, GRAY	🔒 Subscribe
			STEEL TABLE, 48 INCH (L) _ 48 INCH (W) _ 35 INCH (H)	🔒 Subscribe
1972	PEXTO	PH52	1972 PEXTO PH52 HYDRAULIC SHEAR, 16 GAUGE X 52", FOOT PEDAL S/N: 12/72	🔒 Subscribe
	HYD-MECH	C350-2S	HYD-MECH MODEL C350-2S COLD SAW, SEMI-AUTOMATIC, 4 1/2 INCH CAPACITY, 3 HP, 14 INCH BLADE S/N: 5-03-15-148-SB	🔒 Subscribe
			STEEL TABLE, 46 INCH (L) _ 96 INCH (W)	🔒 Subscribe
			OVEN - NEEDS ASSEMBLED	🔒 Subscribe
			STEEL TABLE, 61 INCH (L) 120 INCH (W) 37 INCH (H) WITH 5 INCH BENCH VISE	🔒 Subscribe
			STEEL TABLE, 49 INCH (L) _ 72 INCH (W) _ 32 INCH (H)	🔒 Subscribe
	LINCOLN	140C	LINCOLN 140C MIG WELDER, PORTABLE	🔒 Subscribe
			STEEL TABLE, 61 INCH (L) _ 120 INCH (W) _ 37 INCH (H)	🔒 Subscribe
			MODULAR STEEL STORAGE RACK, 42 INCH (L) _ 48 INCH (W) _ 73 INCH (H)	🔒 Subscribe
	AKRO MILLS		AKRO MILLS BIN RACK 2 SIDED, 36 INCH (W) 72 INCH (H)	🔒 Subscribe
			(4) STEEL MATERIAL TRANSPORT CARTS, 31 INCH (L) _ 42 INCH (W) _ 52 INCH (H)	🔒 Subscribe
			STEEL MATERIAL STORAGE RACK, 48 INCH (L) X 48 INCH (W) X 42 INCH (H)	🔒 Subscribe
	MORRISON INDUSTRIES	STACKABLE SHIPPING RACK (PROTOTYPE: 18344)	MORRISON INDUSTRIES STACKABLE SHIPPING RACK (PROTOTYPE: 18344), 52 INCH (L) _ 48 INCH (W) _ 52 INCH (H)	🔒 Subscribe
	ALL STEEL	20-4	ALL STEEL HYDRAULIC PRESS BRAKE, MODEL 20-4, 20 TON X 48 INCH S/N: 175	🔒 Subscribe
	BRIDGEPORT	SERIES I	2 HP BRIDGEPORT SERIES I VERTICAL MILL	🔒 Subscribe
			STEEL RACK, 24 INCH (L) _ 48 INCH (W) _ 68 INCH (H)	🔒 Subscribe
			MATERIAL TRANSPORT CART, 28 INCH (L) _ 48 INCH (W) _ 76 INCH (H)	🔒 Subscribe
			MATERIAL TRANSPORT CART, 37 INCH (L) _ 48 INCH (W) _ 56 INCH (H)	🔒 Subscribe
			MATERIAL TRANSPORT CART, 32 INCH (L) _ 42 INCH (W) _ 72 INCH (H)	🔒 Subscribe
			CARTON GRAVITY FLOW ROLLER RACK, 33 INCH (L) _ 49 INCH (W) _ 59 INCH (H)	🔒 Subscribe
			(2) STEEL RACKS ON CASTERS, 30 INCH (L) _ 35 INCH (W) _ 67 INCH (H)	🔒 Subscribe
			CARTON GRAVITY FLOW ROLLER RACK, 33 INCH (L) _ 49 INCH (W) _ 59 INCH (H)	🔒 Subscribe
			CARTON GRAVITY FLOW ROLLER RACK ON CASTERS, 50 INCH (L) X 72 INCH (W) X 49 INCH (H)	🔒 Subscribe
			CARTON GRAVITY FLOW ROLLING RACK ON CASTERS, 32 INCH (L) X 72 INCH (W) X 49 INCH (H), 1,200 LB CAPACITY	🔒 Subscribe
			STEEL MATERIAL CART, 32 INCH (L) _ 42 INCH (W) _ 71 INCH (H)	🔒 Subscribe
			STEEL STACKABLE SHIPPING / STORAGE RACK, 48 INCH (L) _ 84 INCH (W) _ 56 INCH (H)	🔒 Subscribe
2013	MATTEI	M111C-ICBFN000A	2013 MATTEI M111C-ICBFN000A AIR COMPRESSOR, 25 HP, WITH MATTEI AIR DRYER, AND HOLDING TANK S/N: 093305-2013	🔒 Subscribe
	POWDER X	FD150-PB	POWDER X CURING OVEN 10' W X 8' T X 24', POWER FLAME BURNER, MODEL FD150-PB, S/N. 010806430, JOB ORDER NO. J042709, TYPE: NATURAL GAS, CAPACITY: 751500 MBH, CONTROL VOLTAGE: 115V/1PH/60HZ, CONTROL AMPS: 6.0, MOTOR VOLTAGE: 115V/1PH/60HZ, MOTOR AMPS: 5.6, MOTOR HORSEPOWER: 1/3 HP, GAS MANIFOLD PRESSURE: 1.7 IN. W.C.	🔒 Subscribe
	TOYOTA	5FBA15	TOYOTA 5FBA15 FORK LIFT, LP, HARD TIRE, CAGE, 2,900 LB. CAPACITY, 4' FORKS. S/N: 24177	🔒 Subscribe
	DAITO	GA320	DAITO GA320 SEMI AUTOMATIC HORIZONTAL BAND SAW, 1 1/4 INCH BLADE, 12.5 INCH X 12.5 INCH RECT. CAP., 13 INCH ROUND CAPACITY	🔒 Subscribe
	DO-ALL		DO-ALL VERTICAL BAND SAW, 36 INCH, BLADE WELDER, TABLE FEED	🔒 Subscribe
	TAYLOR WINFIELD	ERF-12-30	TAYLOR WINFIELD ERF-12-30 AIROPER SPOT WELDERM, TECHNITRON WELD CONTROLS, 30 KVA, 12 INCH THROAT, 230/460/3/60 S/N: 73460B	🔒 Subscribe
	G.E. SCHMIDT	APR1275-2050	G.E. SCHMIDT APR1275-2050 SPOT WELDER, 75 KVA, WITH WTC TECHNITRON CONTROLS S/N: 01511	🔒 Subscribe
	MILLER	DELTAWELD 650	MILLER DELTAWELD 650 MIG WELDER, MILLER WIRE FEEDS, 200/208/230/460/3/60 S/N: JC623372	🔒 Subscribe

GLOBAL INDUSTRIAL

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

(6) GLOBAL INDUSTRIAL FOLDING WIRE BASKETS, 40"L X 32"W X 34-1/2"H, 3000 LB. CAPACITY, GRAY...

Hammer Price: 🔒

GLOBAL INDUSTRIAL

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

(6) GLOBAL INDUSTRIAL FOLDING WIRE BASKETS, 40"L X 32"W X 34-1/2"H, 3000 LB. CAPACITY, GRAY...

Hammer Price: 🔒

GLOBAL INDUSTRIAL

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

(6) GLOBAL INDUSTRIAL FOLDING WIRE BASKETS, 40"L X 32"W X 34-1/2"H, 3000 LB. CAPACITY, GRAY...

Hammer Price: 🔒

WELDOMATIC AF-25

WELDING & CUTTING

WELDOMATIC SPOT WELDER, MODEL AF-25, 75 KVA, 36 INCH THROAT, UNITROL SOLUTION CONTROLS, UPGRADED BY ...

Hammer Price: 🔒

TENNSMITH

METALWORKING & FABRICATION EQUIPMENT

TENNSMITH 24 INCH MANUAL SLIP ROLL...

Hammer Price: 🔒

LUBOW NIPPER

METALWORKING & FABRICATION EQUIPMENT

LUBOW NIPPER...

Hammer Price: 🔒

GLOBAL INDUSTRIAL

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

(6) GLOBAL INDUSTRIAL FOLDING WIRE BASKETS, 40"L X 32"W X 34-1/2"H, 3000 LB. CAPACITY, GRAY...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

STEEL TABLE, 48 INCH (L) _ 48 INCH (W) _ 35 INCH (H)...

Hammer Price: 🔒

1972 PEXTO PH52

METALWORKING & FABRICATION EQUIPMENT

1972 PEXTO PH52 HYDRAULIC SHEAR, 16 GAUGE X 52", FOOT PEDAL S/N: 12/72...

Hammer Price: 🔒

HYD-MECH C350-2S

METALWORKING & FABRICATION EQUIPMENT

HYD-MECH MODEL C350-2S COLD SAW, SEMI-AUTOMATIC, 4 1/2 INCH CAPACITY, 3 HP, 14 INCH BLADE S/N: 5-03-...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

STEEL TABLE, 46 INCH (L) _ 96 INCH (W)...

Hammer Price: 🔒

FOOD PROCESSING AND RESTAURANT EQUIPMENT

OVEN - NEEDS ASSEMBLED...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

STEEL TABLE, 61 INCH (L) 120 INCH (W) 37 INCH (H) WITH 5 INCH BENCH VISE...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

STEEL TABLE, 49 INCH (L) _ 72 INCH (W) _ 32 INCH (H)...

Hammer Price: 🔒

LINCOLN 140C

WELDING & CUTTING

LINCOLN 140C MIG WELDER, PORTABLE...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

STEEL TABLE, 61 INCH (L) _ 120 INCH (W) _ 37 INCH (H)...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

MODULAR STEEL STORAGE RACK, 42 INCH (L) _ 48 INCH (W) _ 73 INCH (H)...

Hammer Price: 🔒

AKRO MILLS

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

AKRO MILLS BIN RACK 2 SIDED, 36 INCH (W) 72 INCH (H)...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

(4) STEEL MATERIAL TRANSPORT CARTS, 31 INCH (L) _ 42 INCH (W) _ 52 INCH (H)...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

STEEL MATERIAL STORAGE RACK, 48 INCH (L) X 48 INCH (W) X 42 INCH (H)...

Hammer Price: 🔒

MORRISON INDUSTRIES STACKABLE SHIPPING RACK (PROTOTYPE: 18344)

MISC

MORRISON INDUSTRIES STACKABLE SHIPPING RACK (PROTOTYPE: 18344), 52 INCH (L) _ 48 INCH (W) _ 52 INCH ...

Hammer Price: 🔒

ALL STEEL 20-4

PRESSES & FORMING

ALL STEEL HYDRAULIC PRESS BRAKE, MODEL 20-4, 20 TON X 48 INCH S/N: 175...

Hammer Price: 🔒

BRIDGEPORT SERIES I

METALWORKING & FABRICATION EQUIPMENT

2 HP BRIDGEPORT SERIES I VERTICAL MILL...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

STEEL RACK, 24 INCH (L) _ 48 INCH (W) _ 68 INCH (H)...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

MATERIAL TRANSPORT CART, 28 INCH (L) _ 48 INCH (W) _ 76 INCH (H)...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

MATERIAL TRANSPORT CART, 37 INCH (L) _ 48 INCH (W) _ 56 INCH (H)...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

MATERIAL TRANSPORT CART, 32 INCH (L) _ 42 INCH (W) _ 72 INCH (H)...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

CARTON GRAVITY FLOW ROLLER RACK, 33 INCH (L) _ 49 INCH (W) _ 59 INCH (H)...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

(2) STEEL RACKS ON CASTERS, 30 INCH (L) _ 35 INCH (W) _ 67 INCH (H)...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

CARTON GRAVITY FLOW ROLLER RACK, 33 INCH (L) _ 49 INCH (W) _ 59 INCH (H)...

Hammer Price: 🔒

MISC

CARTON GRAVITY FLOW ROLLER RACK ON CASTERS, 50 INCH (L) X 72 INCH (W) X 49 INCH (H)...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

CARTON GRAVITY FLOW ROLLING RACK ON CASTERS, 32 INCH (L) X 72 INCH (W) X 49 INCH (H), 1,200 LB CAPAC...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

STEEL MATERIAL CART, 32 INCH (L) _ 42 INCH (W) _ 71 INCH (H)...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

STEEL STACKABLE SHIPPING / STORAGE RACK, 48 INCH (L) _ 84 INCH (W) _ 56 INCH (H)...

Hammer Price: 🔒

2013 MATTEI M111C-ICBFN000A

AIR COMPRESSORS

2013 MATTEI M111C-ICBFN000A AIR COMPRESSOR, 25 HP, WITH MATTEI AIR DRYER, AND HOLDING TANK S/N: 0933...

Hammer Price: 🔒

POWDER X FD150-PB

MISC

POWDER X CURING OVEN 10' W X 8' T X 24', POWER FLAME BURNER, MODEL FD150-PB, S/N. 010806430, JOB ORD...

Hammer Price: 🔒

TOYOTA 5FBA15

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

TOYOTA 5FBA15 FORK LIFT, LP, HARD TIRE, CAGE, 2,900 LB. CAPACITY, 4' FORKS. S/N: 24177...

Hammer Price: 🔒

DAITO GA320

METALWORKING & FABRICATION EQUIPMENT

DAITO GA320 SEMI AUTOMATIC HORIZONTAL BAND SAW, 1 1/4 INCH BLADE, 12.5 INCH X 12.5 INCH RECT. CAP., ...

Hammer Price: 🔒

DO-ALL

METALWORKING & FABRICATION EQUIPMENT

DO-ALL VERTICAL BAND SAW, 36 INCH, BLADE WELDER, TABLE FEED...

Hammer Price: 🔒

TAYLOR WINFIELD ERF-12-30

WELDING & CUTTING

TAYLOR WINFIELD ERF-12-30 AIROPER SPOT WELDERM, TECHNITRON WELD CONTROLS, 30 KVA, 12 INCH THROAT, 23...

Hammer Price: 🔒

G.E. SCHMIDT APR1275-2050

WELDING & CUTTING

G.E. SCHMIDT APR1275-2050 SPOT WELDER, 75 KVA, WITH WTC TECHNITRON CONTROLS S/N: 01511...

Hammer Price: 🔒

MILLER DELTAWELD 650

WELDING & CUTTING

MILLER DELTAWELD 650 MIG WELDER, MILLER WIRE FEEDS, 200/208/230/460/3/60 S/N: JC623372...

Hammer Price: 🔒

<< Previous 1 2

Disclaimer: BidSeek aggregates publicly available auction and liquidation results from independent third-party sources for research and valuation reference only. BidSeek is not affiliated with, endorsed by, sponsored by, or operated in connection with any auction house, marketplace, or liquidation firm. All data and images are provided as-is for informational purposes and remain the property of their respective owners.

Recent Searches

Login

Reset Password

NCT Technologies Group Inc

Save to Project Folder

Print Options

Save to Project Folder